Anderson Connector Bracket & Winch Power Quick Connect Kit for Compact Tractors
A CNC-machined 1/4" steel Anderson connector bracket, pre-wired with 2 AWG copper leads, that mounts to the front of your tractor and gives your front mount winch a weatherproof power port. Plug the winch in, pull the handle to disconnect. No more popping the hood to clamp winch leads on the battery. Doubles as a battery charging port.
Free shipping anywhere in the Continental US! All orders shipped within 2 days.
See It in Action
Electrical Anderson Quick Connect Kit (for Winch)
$80.00
Tired of needing to open the hood of your tractor to hook up your winch to the battery every time you need it, or have you just avoided using a winch all together because of the hastle even though you have though about wiring one up in the past? This complete quick connect kit lets you hook up your front mount winch in seconds — and disconnect just as fast with the quick-pull handle.
Built from 1/4" CNC-machined and welded steel, this bracket stays firm to make plugging in the Anderson connector quick and painless, unlike flimsy plastic or thin brackets on the market that will flex as you try to push in the connector. The industry standard Anderson connectors provide a solid, weatherproof electrical connection rated for high-current applications.
What's Included
- CNC-machined and welded 1/4" steel mounting bracket - Quality craftsmanship, made in the USA
- 2x 175A Anderson connectors (SB175 size) - one for the winch side and one pre-assembled onto the bracket with high grade wires
- Flip-down weatherproof cover
- High-grade pure copper 2 gauge (AWG) wires - positive and negative wires with battery lugs, fuse, and Anderson connector pre-assembled with solid crimping and heat shrink connections
- Battery lugs
- High-grade stainless steel mounting hardware
- Pass-through grommet for a nice clean look where the wires pass through the grill
- Quick-pull disconnect handle
- Fuse for the positive lead to prevent accidental battery short or overload
Fully assembled and ready to install!
Not Included
Tractor, winch, winch mounting hardware, or 2" receiver, although I can point you in the right direction to buy any of these things.
Free shipping anywhere in the Continental US! All orders shipped within 2 days.
Secure checkout powered by Stripe
The Tractor Anderson Connector Bracket
The bracket is the part that makes a tractor winch quick connect actually work. Anderson connectors need real force to seat. If the tractor-side connector is zip-tied to the grill, dangling on its wires, or screwed to a thin plastic or sheet-metal mount, it moves away from you every time you push the winch plug in. You end up holding it with one hand, pushing with the other, and usually popping the hood anyway.
This Anderson connector bracket is cut on a CNC machine from 1/4" steel plate, welded, and sized for the 175-amp Anderson connector that compact tractor winches use. It bolts to the front of the tractor with the included stainless steel hardware and does not flex. You line up the winch plug, push once, and it seats. To disconnect, pull the handle.
Because the bracket is fixed and faces outward, the flip-down weatherproof cover keeps rain, mud, and road grit out of the contacts when the winch is off the tractor. The same port works as a winch power bracket and a battery tender port, so your charger plugs into the front of the tractor too.
Bracket Specifications
- Material
- 1/4" steel plate, CNC-machined and welded
- Connector
- 175A Anderson (SB175 size), pre-installed on the bracket; second connector included for the winch side
- Wiring
- 2 AWG pure copper positive and negative leads, battery lugs, inline fuse, crimped and heat-shrunk
- Weather protection
- Flip-down weatherproof cover over the connector
- Disconnect
- Quick-pull handle, no tools
- Mounting
- Front of tractor, connector facing the winch. Stainless steel hardware and grill pass-through grommet included
- Fits
- Compact and sub-compact tractors with a 12V front mount electric winch: John Deere 1–4 series, Kubota BX/B/L, Mahindra, Kioti, LS, TYM, Branson, Massey Ferguson
- Origin
- Designed, machined, welded, and assembled in the USA
Frequently Asked Questions
Everything you need to know about the Anderson connector bracket and winch quick connect kit.
Why We Built This
I made this kit out of my own need. After getting a front mount winch for my compact tractor, I was tired of the hassle of hard-wiring it every time I wanted to use it. So I designed and fabricated a quick connect solution that makes it dead simple — connect in seconds, pull the handle to disconnect.
It's been such a great convenience on my own tractor that I figured other folks would want one too. Each kit is CNC machined and welded in my shop, assembled and ready to install right out of the box.
I have a batch ready to ship now, and my CNC machine and raw materials on standby to make more if there's interest beyond the first run.
Questions?
Want to know if this kit will work with your setup? Have questions about installation? Reach out — happy to help.
Contact Us